background image

Table of  Contents
Set Up Checklist

.......... ............................................................... 3

Locomotive Coupler Installation.......................................3
Lubrication........................................................................ 5
Priming The Smoke Unit.................................................. 5
Checking the Battery........................................................ 6
Placing The Engine On The Track.....................................6
Installing the Locomotive Pilot Details.............................7

Basic Operation

............................................................................ 8

Activating Features Using DC Power............................... 8
Using DCS with DC Power............................................... 9
DCS Polarity Switch..........................................................10 
Activating Features Using AC Power................................11

Proto-Sound 2.0 Operating Instructions

 ................................. 12

Activating Proto-Sound 2.0 Conventional Mode Features...

. 12

Freight Yard Sounds (FYS)............................................... 13
Proto-Coupler Operation................................................... 14
Speed Control.................................................................... 15
Locking Locomotive Into A Direction.............................. 16
Reset To Factory Default.................................................. 16
Automatic Sound Effects.................................................. 16

Maintenance

..................................................................................17

Lubricating and Greasing Instructions.............................. 17
Traction Tire Replacement Instructions.............................18
Light Bulb Replacement Instructions................................ 19
Self Charging Battery Back-Up........................................ 21
ProtoSmoke® Unit Operation............................. ............. 23
Installing the Fixed Locomotive Pilot............................... 24
Troubleshooting Proto-Sound® 2.0 Problems.................. 26
Transformer Compatibility and Wiring Chart................... 29
Additional Features Accessible With The DCS System.... 31
Service & Warranty Information....................................... 32
Limited One-Year Warranty...............................................32

CAUTION: ELECTRICALLY OPERATED PRODUCT:
Not recommended for children under 10 years of age.  M.T.H. recommends adult supervision with children ages 10 - 16.  
As with all electric products, precautions should be observed during handling and use to reduce the risk of electric shock.

WARNING:

 When using electrical products, basic safety precautions should be observed, including the following:

Read this manual thoroughly before using this device.

l

M.T.H. recommends that all users and persons supervising use examine the hobby transformer and other electronic equipment 

periodically for conditions that may result in the risk of fire, electric shock, or injury to persons, such as damage to the primary 
cord, plug blades, housing, output jacks or other parts.  In the event such conditions exist, the train set should not be used until 
properly repaired.

l

Do not operate your layout unattended.  Obstructed accessories or stalled trains may overheat, resulting in damage to your layout.

l

This train set is intended for indoor use.  Do not use if water is present.   Serious injury or fatality may result.

l

Do not operate the hobby transformer with damaged cord, plug, switches, buttons or case.

Summary of Contents for DASH-8 DIESEL ENGINE

































Reviews: