RailKing AeroTrain Locomotive
5
Manual Volume Control
To adjust the volume of all sounds made by this engine, turn the master volume control
knob located next to the fuel tank clockwise to increase the volume and
counter-clockwise to decrease the volume.
Proto-Sound 2.0
Volume Adjustment Knob
Figure 2: Manual Loco-Sound Volume Adjustment
Configuring For Display
It is possible to configure the powered unit for prototypical appearance when desiring to
only display the model. Such a configuration can be accomplished by following the
directions below to change the powered unit’s trailing power truck guide wheel
placement.
Unscrew and remove
guide wheels from
trailing power truck on
powered unit
Center trailing power truck
on frame and screw
guide wheels into holes
provided on frame
as shown.
Unscrew and remove
pickup roller assembly
from trailing power
truck to reveal
pickup roller assembly
insulating pad
Rotate pickup roller
assembly insulating
pad 180 degrees and
reattach pickup roller
assembly with roller
facing toward truck
block as shown.
