Getting Started
®
Assembling RealTrax
The quick connectors and built-in roadbed allow you to set up RealTrax anywhere,
including carpeted surfaces.
Connecting the Transformer
T
att power supply included with this set provides an
easy-to-use, safe power source for AC-powered trains and
accessories.
!
Plug the wire from the transformer into the remote
lock-on's center port, then plug the transformer into
the wall outlet.
!
Unplug when not in use.
he 75-w
4
Gently push together RealTrax
Insert lock-on into
knock-out tab
(Lock-on is the interface between
the track and transformer)
Make sure the metal
contacts line up.
Align Quick
Connect Plugs
Knock-out must be removed
before remote lock-on can
be installed
Remove knock-out from
outer edge of track by
holding and twisting up
with a pair of pliers
REMOVE TAB
FROM OUTER EDGE
Line up the track clip
Pop track clip in place.
Connecting
Track Clips
If you prefer not to screw
your track to the table for
a permanent layout, use
the enclosed track clips
on adjoining curved
RealTrax sections to
secure them in place.
STEP
1
1
STEP
1
1
STEP
2
2
STEP
2
2
STEP
3
3
STEP
4
4
STEP
5
5
STEP
6
6
RailKing 6-8-6 Bantam Turbine Steam Passenger Set with Loco-Sound™
