Rail King 2-8-8-2 Steam Engine Instruction Manual Download Page 14

Page: 14 / 20

2-8-8-2 STEAM ENGINE

Although Proto-Sound 2.0 has been designed and engineered for ease of use, you may

have some questions during initial operation. The following table should answer most

questions. If your problem cannot be resolved with this table, contact M.T.H. for

assistance

(telephone: 410-381-2580; fax: 410-423-0009; [email protected],

7020 Columbia Gateway Drive, Columbia MD 21046-1532).

TROUBLESHOOTING

PROTO-SOUND® 2.0

RAILKING M.T.H. ELECTRIC TRAINS

Starting Up

Remedy

When I first turn the power on, the engine
will not begin to run. I have to turn the
throttle off and on again to get the engine
to operate.

This is normal behavior.

To prevent

accidental high-speed start-ups, ProtoSound
2.0 is programmed to start up in neutral
anytime track power has been turned off
for several seconds. See the “Basic
Operation” section for more details.

Horn/Whistle

Remedy

When I press the horn/whistle button, the
bell comes on instead.

I can’t get the horn to blow when I press
the whistle button.

Reverse the transformer leads.

You may be pressing the button too
quickly.

Try pressing the horn/whistle button

more slowly, taking approximately one full
second to fully depress the button.

Bell

Remedy

When I press the bell button, horn/whistle
comes on instead.

I can’t get the horn to blow when I press
the whistle button.

The bell won’t work on a separate bell
button.

Reverse the transformer leads.

You may be pressing the button too quickly.
Try pressing the bell button more slowly,

taking approximately one full second to
fully depress the button.

Check the wiring of the separate button.

Bell

Remedy

When I try to fire the coupler, FYS start

The Proto-Coupler won’t let the engine
uncouple on the fly.

The coupler does not fire or stay coupled.

You are waiting too long between whistle
button presses.

Try lubricating the coupler knuckle with
a dry graphite lubricant. Do NOT use oil.

The coupler needs to be cleaned. Wipe
with denatured alcohol

(not rubbing

alcohol) and let dry.

Summary of Contents for 2-8-8-2 Steam Engine





















Search results

Summary of Contents for 2-8-8-2 Steam Engine

Reviews:

Related manuals for 2-8-8-2 Steam Engine

Brands by name

Popular brands

Rail King 2-8-8-2 Steam Engine, Instruction Manual

Search results

Summary of Contents for 2-8-8-2 Steam Engine

Reviews:

Related manuals for 2-8-8-2 Steam Engine

Brands by name

Popular brands