manualshive.com logo in svg

Rail King 2-8-0 STEAM ENGINE, Operating Instructions Manual

Share
Download
Rail King 2-8-0 STEAM ENGINE Operating Instructions Manual Download Page 20

20

RailKing 2-8-0 Steam Engine

• Proto-Effects™ Set Up-User can select individual Proto-Effects™ operations 
to be active or inactive, including cab chatter, train wreck sounds, coupler
sounds, and wheel clickety-clack sounds.

• Direction Control Set Up-User can set initial individual start-up direction
(start in forward or reverse) for double-heading operations.

• Locomotive Consist Set-up-User can determine locomotive values for
consist make-ups, allowing multiple locomotives belonging to a consist to
operate together.

• Query Locomotive Information-User can query locomotive programming to
learn locomotive address and engine data information, including scale miles
traveled.

• User Can Query, Set and Operate Track and Accessory Interface Units for
Programming Digital Command Operations for up to 250 Accessories and 250 
Individual Switches.

• User Can Script, Record and Playback Train Routes.

Summary of Contents for 2-8-0 STEAM ENGINE

























Reviews:

No comments

Brands by name

Popular brands

Load more brands