1
3
4
2
Users can set the RAID mode using the LCD and buttons on the front. The default is JBOD mode.
With the “Quick Setup” feature, users can quickly change other RAID modes.
For other settings, please go to the official website related product page to download the manual,
refer to "5. Description of Front Panel Operation and LCD Information".
GR����-SB��+ Quick Installation Guide
Package Contents and Product Views
Front view
Rear view
HDD access light
HDD enclosure handle
HDD tray key lock
LCM display
Power touch switch
System status light
UP button
DOWN button
ESC button
ENTER button
Fan
Mute button
Display port
e-SATA port
USB3.1 port
Power main switch
Power socket
Fan speed switch
Anti-theft lock
S
Important Notice
When connected to the computer system, it’s prohibited to remove, insert or swap the hard drive
while data transfer is being performed.
It’s prohibited to change the positioning of the drives once the initial installation has been
completed as the changes made to the drive positions may destroy the RAID formation.
The product needs to be restarted after adding or changing the RAID mode, and the update is
guaranteed to be the new RAID mode.
When the Notebook which support USB PD function is only connected to GR5640-SB31+,
GR5640-SB31+ can provide up to 24W (12V/2A) power supply, but if then connected to other
power supply such like the original Notebook power supply, Notebook will automatically judge which
one will be the main power source, usually the one which can provide more Wattage will be. At this
time, GR5640-SB31+ may be interrupted and re-identified by the Notebook. Therefore, before
connecting to other power supplies, please make sure that there are no data accessed between
Notebook and GR5640-SB31+.
GR5640-SB31+ can only provide 24W at most, which is different from the original Notebook
power supply. It mainly to extend the Notebook's usage time. Take Macbook Pro 13" as an
example, the original power supply is 60W, assuming it take 2 hours for it to fully charge the
battery , use GR5640-SB31+ might need three times time. Therefore, if user need to use
Notebook for a long time, it is recommended to connect the original power supply first before
connect GR5640-SB31+.
Whenever turning off or unplugging the GR5640-SB31+ from your computer system becomes
necessary, always remember to safely remove it from your operating system first.
It is highly recommended for users to back up important data contained within the GR5
unit on a regular basis or whenever the user feels necessary to a remote or a separate storage
device. RAIDON will not be responsible for any lost of data caused during the use of the unit or
the recovery of the data lost.
�.
�.
�.
�.
�.
�.
�.
4K
More Pixels
(4K@30Hz)
Smart Charge
(24W)
Notebook
★
Notebook will need to support 5V/9V/12V charge.
Open the package and you should find the following :
Hardware Installation
Visual Status Indicator Definitions
1.
2.
Place the system on a stable surface. Ensure that it is well ventilated without blockage to the vent
and kept away from areas near water and damage prone areas.
Use the key included in the accessory kit to unlock the HDD tray key lock, and then press the HDD
tray key lock. The removable drive tray will pop open and extract the removable drive tray.
Please check the product and accessories for any defect or missing parts. If you have any
questions, please contact your product supplier.
Please visit the official website - Download page (https://www.raidon.com.tw/RAIDON2016/
download.php) to download drivers and other related resources.
●
●
Enter: Enter to next level or Confirm
Esc: Back to next level or Cancel
Up / Down: Select Items
Other Applications
Support DisplayPort
The GR5640-SB31+ offers a DisplayPort support DP1.1a, provides up to 4K@30Hz resolution ,
and is compatible with monitor and cables with DisplayPort.
By using third-party's DisplayPort adapter, it can be connected to the monitor with Mini
DisplayPort interface.
By using third-party's active DisplayPort adapter, it can be connected to the monitor with VGA,
DVI and HDMI interface.
1.
2.
3.
Support USB Power Delivery (USB-PD)
USB Power Delivery (USB-PD) introduces charging technology and unified cable standards.
GR5640-SB31+ supports USB-PD. Use USB Type-C to USB Type-C cable, it can provide up to
24W (5V/3A (15W), 9V/2A (18W), 12V/2A (24W)) power charging to the host.
1.
2.
3.
RAIDON is one brand under RAIDON TECHNOLOGY, INC.
Thank you for choosing
RAIDON’s product.
The information provided in this manual was checked before publication, but the actual product
specifications may have changed before shipping; Latest product specifications and updates can be
found at
www.RAIDON.com.tw or through your sales representative. No separate notifications will be
provided by our company.
If you have any questions about RAIDON products or would like to receive the latest product information,
instruction manuals, or firmware, please contact S
[email protected] for assistance.
All product-related content in this manual are copyrighted by
RAIDON TECHNOLOGY, INC.
High
Low
R
S
Note: Please avoid using hard disk drives from different manufac turers or different
models from the same manufacturer as this may impact system performance.
6.
7.
8.
9.
10.
11.
Connect the cable to the PC and the GR5640-SB31+ port.
First turn
the power main switch on the back of the product
to “I” to turn the power on, then gently
press
the power touch switch on the front of the product
until the power symbol “ ” lights up.
Set the storage mode using the LCD and buttons on the front (please refer to section 5 for front
panel and LCD information).
After boot-up, your operating system will automatically detect the storage capacity of your hard
drives. Please follow the operating system instructions to configure and format your drives. The
formatted drives can be configured for the RAID setup.
If you are not using the product for a while, you can put the product into shutdown mode: first
press
the power touch switch on the front of the product
until the power symbol “ ” is off; if
you want to use the product, gently press
the power touch switch on the front of the product
until the power is turned on. The symbol “ ” is illuminated.
If the product is not used for a long time, please turn off the product main power switch: first gently
press
the power touch switch on the front of the product
until the power symbol “ ” is off,
then turn
the power main switch on the back of the product
to “ O ” to turn off the power.
※
The product is in a state of near-complete power-off in shutdown mode, and the hard disk, LCD, and fan
are all out of operation, providing only a small portion of power for preparation for subsequent startup.
If the connected host is a notebook that supports USB-PD (5V/9V/12V) charging, it will remain
charging after the notebook is powered off or restarted while the GR5640-SB31+ is still power on.
If the GR5640-SB31+ cannot be recognized after the notebook restarted, please reconnect the
Type-C cable or restart the GR5640-SB31+.
Raidon
Status
Power LED
Alarm LED
HDD LED
Buzzer
RAID
JBOD RAID JBOD
No HDD
Blue light always on
— —
— —
— —
Access
Blue light always on
— —
— —
Disk Idle
Blue light always on
— —
Blue light always on
— —
Rebuilding -
Source
Blue light always on
— —
Blue light — —
— —
Rebuilding -
Target
Blue light always on
— —
Purple light — —
— —
Fan Failed
Blue light always on Red light always on Blue light always on
YES
Over Temp
Blue light always on Red light always on Blue light always on
YES
Contents of Product Package
GR5640-SB31+ x 1 ( with removable drive tray enclosed x 4)
USB 3.1 Cable x 1
e-SATA Cable x 1
AC Power Cable x 1
Quick Installation Guide x 1
Screws & Keys
For 3.5" HDD/SSD, please secure it by use six the larger screws included in the accessory kit. For
2.5" HDD/SSD, please secure it by use four the smaller screws included in the accessory kit.
When the hard drive installation has been completed, insert the hard drive tray into the system
horizontally and secure the latch into place.
Connect the AC power cable to the GR5640-SB31+, and then plug the AC power to the wall
socket. Boot-up the unit.
Lock
Unlock
Press
3.
4.
5.
V�.� (May ����)