iR8023 User Manual
11
M.2 SATA SSD Failure
Under the Mirror mode (RAID 1), what will be the total storage capacity when adding a brand
new M.2 SATA SSD?
1. The total storage capacity at your iR8023 is determined by the storage capacity of the
primary M.2 SATA SSD installed during the initial usage.
2. The storage capacity will not be increased even though you replace a larger capacity new M.2
SATA SSD.
Why does the error message appear when I install the second M.2 SATA SSD ?
= #{>=>>#{>=
SSD .Otherwise, iR8023 is unable to perform REBUILDING work.
Q1.
%
Q2.
%
About the Auto Rebuilding Function
What will happen if we turn off the computer power while iR8023 is still executing auto
REBUILDING work?
+ @- } ;^" $ ]J{|
will still remember the percentage of its REBUILDING work, and then resume it back to its
REBUILDING work while computer power is back on.
Is it possible to lose data during the REBUILDING work?
The REBUILDING work will automatically duplication data from one sector to another sector.
Technically speaking, the data should not be lost during its REBUILDING work. However, if the
original HDD is detected with too many bad sectors during the REBUILDING work, iR8023 will
make hypothetical duplication instead of treating the bad sectors as HDD failure. Therefore, the
data stored in the bad sectors could potentially be lost during REBUILDING work.
Q1.
%
Q2.
%
Summary of Contents for iR8023
Page 1: ...InTANK iR8023 User Manual ...
