manualshive.com logo in svg

Raidon iR2880-8S-U5, User Manual

Share
Download
Raidon iR2880-8S-U5 User Manual Download Page 37

5. Detach (appear only after being exposed)

    Remove LUN for given Snapshot.

6. List LUN (appear only after being exposed)

    Display list of all the connected LUN.

3.5.6 Logical unit 

Entering the Logical unit function to view/add logical units attached to each virtual hard disk.

Figure 3.5.6.1

Click the button below Host ID to delete given LUN.

Each virtual disk must have one dedicated LUN attached to it. Without this the selected volume is 

unusable

3.6 Enclosure management

The Enclosure management option lets you set up and manage the SES configuration, Hardware 

monitor, S.M.A.R.T. and UPS related functions.

Figure 3.6.1

3.6.1 SES configuration 

Switch on and off the SES connection between selected Host and LUN.

The SCSI Enclosure Services (SES) enable you to access data of power, temperature and other 

hardware monitoring inside the cabinet with SCSI commands from the host end. Extra third-party 

software is required at the host end for this. Please refer to the SANtools documents available at 

http://www.santools.com/.

Figure 3.6.1.1

Introduction to the GUI

  37

Summary of Contents for iR2880-8S-U5










































Reviews:

No comments

Brands by name

Popular brands

Load more brands