Raider RDP-SLM20, User Manual

Page: 17 / 62

17
▪ replace or repair any damaged parts
▪ check for and tighten any loose parts
Avoid holes, ruts, bumps, rocks, property stakes, or other hidden objects. Uneven terrain could cause a slip
and fall accident.
OVERLOAD PROTECTION DEVICE
The product has an overload protection device. The overload protection is assured by the batteries
installed on the product.
When overload is detected the product will automatically switch off.
If the product stop working, release all handle bar switches for a few seconds and let motor cool down.
Check and clean any debris or branches at the blade. Follow normal switch on procedure to activate
the mower again. The motor should again start working.
If the protection device operates often, raise the height of the cut, check the blade is not damaged. If it still
occurs, return to an authorised service centre for investigation.
INTENDED USE
The product is only intended for use outdoors.
The product is designed for domestic lawn mowing. The
Lawn mower has been designed for use only in private gardens and is not suitable for use in public
grounds, parks, sports fields or for agricultural or forestry purposes. Only mow the lawn when the grass is
relatively dry.
Any other use of the lawn mower is considered inappropriate use. The manufacturer shall not be liable for
any damage or injury resulting from misuse.
cutting blade should rotate approximately parallel to the ground over which it is being wheeled. All four
wheels should touch the ground while mowing. It is a pedestrian controlled walk behind mower designed to
be pushed by hand.
The product should never be operated with the wheels off the ground; it should not be pulled or ridden on. It
should not be used to cut anything other than domestic grass lawns.
RESIDUAL RISK
Even when the product is used as prescribed, it is still impossible to completely eliminate certain residual
risk factors. The following hazards may arise in use and the operator should pay special attention to avoid
the following:
Injury caused by vibration. Always use the right tool for the job, use designated handles and restrict
working time and exposure. Exposure to noise can cause hearing injury. Wear ear protection and limit
exposure.
Contact with blades
Injury from thrown objects
Warning: The actual level of vibration while using the lawn mower may differ from the level specified in this
manual by the manufacturer. The following factors may affect actual level of vibration:
- correct use of the lawn mower
- proper maintenance of the lawn mower
- selected height of cut
- sharpness and balance of blade
Make a work plan so that your exposure to vibration can be limited.
If you experience an unpleasant sensation or skin discoloration while using the lawn mower, immediately
stop working. Take sufficient work breaks to prevent hand-arm vibration syndrome.
M a i n t a i n t h e m a c h i n e i n a c c o r d a n c e w i t h t h e instructions in the manual.
Do not use of the lawn mower at temperatures below10°C.
TRANSPORTATION AND STORAGE
Stop the product, remove the isolator key and the battery or disconnect from the power supply, make sure
that all moving parts have come to a complete stop, and allow it to cool before storing or transporting.
Clean all foreign material from the product. Store it in a cool dry and well-ventilated place that is
inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing