Raider RDP-RS28, User Manual

Page: 14 / 82

14 www.raider.bg
1. Pull the Locking Lever for Shoe Adjustment (11)
downwards (Fig. 2).
2. Adjust the shoe (2) to the desired position.
3. Secure the shoe (2) in place by raising the Locking
Lever for Shoe Adjustment (11) to the original position.
WARNING! Do not operate the reciprocating
saw if the adjustable shoe is not installed and fitted
correctly.
Pre-Operation
2.3. Rear Handle Adjustment
Ensure the machine is switched off before adjusting rear handle position.
The rear handle of this tool can be rotated around
the main body of the motor and locked at three different
angles (-90°, 0°, +90°) so that you can operate the tool in
the most comfortable position.
1. Push back the Rotating Handle Lock Button (6) to
unlock the rear handle (Fig.3).
2. Turn the rear handle to desired angle and release
the Rotating Handle Lock Button (6) to lock into desired
position.
Turn the rear handle left or right so that it locks at
the nearest preset position with a light click. The rear
handle can only be adjusted to -90°, 0°, 90° angles.
Fig. 3
2.4. LED Work light
When the power cord is plugged into the mains power
outlet, LED Work light (4) will shine.
This LED Work light can assist in better vision when
working in darker areas.
The LED Work light (4) will turn off when the power
cord is disconnected from the mains power supply.
Fig. 4
CAUTION! Do not stare directly into the beam
of the LED light doing so may damage your eyes.
3. Pre-Operation
3.1.Variable Speed Dial