Raider RDP-JS25, User Manual, Page: 9 / 72

9
Original instructions for use
Dear Customer,
Congratulations on the purchase of machinery from the fastest growing brand of electric,
gasoline and pneumatic machines - RAIDER. When properly installed and operating, RAIDER
are safe and reliable machines and work with them will deliver a real pleasure. For your
convenience has been built and excellent service network of 45 service stations across the
country.
Before using this machine, please carefully acquainted with these “instructions’ manual”.
In the interest of your safety and to ensure proper use and read these instructions
carefully, including the recommendations and warnings in them. To avoid unnecessary
errors and accidents, it is important that these instructions will remain available for future
reference to all who will use the machine. If you sell it to a new owner “Instructions’ manual”
must be submitted along with it to enable new users to become familiar with relevant safety
and operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and
owner of the trademark RAIDER.
Address: Sofia City 1231, Bulgaria “Lomsko shausse” Blvd. 246, tel 02 +359 700 44 155, www.
raider.bg; www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008
with scope of certification: Trade, import, export and servicing of hobby and professional
electrical, mechanical and pneumatic tools and general hardware. The certificate was issued
by Moody International Certification Ltd, England.
Technical Data
parameter unit value
Model
-
RDP-JS25
Mains voltage V AC 230
Frequency Hz 50
Power W 650
No-load Speed min-
1
500-3000
Max Depth Cutting in Metal mm 10
Max Depth Cutting in Wood mm 80
Miter cut
O
from 0 to 45
Protection class - II
Layout.
1. Button to lock the switch.
2. ON/OFF Switch.
3. Adapter for dust extraction system.
4. Selector switch for pendulum action.
5. Base plate.
6. Guide roller.
7. Safety guard.
8. Blade holder.
9. Holder of the guide roller.
10. Screws to change the cutting angle.
11. Speed control.
EN