Raider RDP-CSCL01, User Manual

Page: 13 / 62

13
not pressed, the spindle is locked. Now it is possible to use the screwdriver (even when the
battery is empty) as a manual tool.
Screwdriving
To switch the tool on, press the On/Off switch.
- Press the tumbler switch (R) for clockwise rotation (tightening screws)
- Press the tumbler switch (L) for counterclockwise rotation (loosening screws)
To switch the tool off, release the on/off switch.
User tips for optimum use
• Always hold the tool and screwdriver bit in a straight line with the screw and always use
the correct type and size of bit.
• If screws are difficult to tighten, try applying a small amount of washing liquid or soap as a
lubricant.
• Use the spindle lock feature to loosen very tight screws or to firmly tighten screws.
• When screwing in wood, it is recommended to screwdriver a hole with a depth equal to almost the
length of the screw. A pilot hole guides the screw and prevents splintering or distortion of
the work piece.
5.6. Make periodic breaks at work.
5.7. Keep and refer to the accessories carefully.
5.8. Do not throw the tool, do not overload, do not soak in water and other liquids do not use it for
mixing adhesives and concrete coatings.
6. Operation and maintenance.
Clean the body with dry cloth. Do not use any cleaning agents, as they may damage the casing.
6.1. Replacing carbon brushes.
Worn-out (shorter than 5 mm), up or broken engine carbon brushes should be replaced. Always replace
both brushes simultaneously. Work on replacement of carbon brushes entrusted only to qualified person
with original spare parts in RAIDER service.
6.2. All faults should be repaired by RAIDER service workshop.
6.3. The repair of your power is best carried out only by qualified specialists, which used only original
spare parts. This ensures their safety operation.
7. Environmental protection.
7.1. The machine, accessories and packaging should be sorted for environmental-friendly recycling.
Do not dispose of power tools into household waste!
According the European Directive 2012/19/EC for Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that are no longer usable must be collected separately and
disposed of in an environmentally correct manner.
7.2. Battery packs/batteries:
Litium-Ion (Li-ion).
Warning! These battery packs contain cadmium, a highly toxic heavy metal.
Do not dispose of battery packs/batteries into household waste, fire or water. Battery packs/batteries
should be collected, recycled or disposed of in an environmental-friendly manner.
Defective or dead out battery packs/batteries must be recycled according the Directive 2006/66/EC.