10
www.raider.bg
APPLICATION:
ATTENTION! Read these operating instructions before operating the machine.
1. Pump housing
2. Bolt
3. Bolt
4. Balloon
5. Compound
6. Power cord
7. Pressure regulator key
8. Pressure gauge
9. Butt
10. Cable
CHARACTERISTICS
The hydrophore is designed for automatic pressure control. Also, the hydrophore automatically
stops the pump when there is a lack of water. In this way it protects against possible damage during
dry operation.
ATTENTION! To protect yourself from electric shock and the risk of sparks, follow these instructions:
- Always unplug the appliance after stopping operation.
- Always carefully install the hydrophore away from any water sources.
- When using a hydrophore near swimming pools, it is mandatory to use an automatic RCD with 10n
= 30 mA protection.
ATTENTION! When the pump stops working, the pipes are still under pressure, so we recommend
removing the plug to free the system. You can then return the controller to operating mode.
METHOD OF USE
Pressing the key starts the pump 35 seconds after you have connected it. The hydrophore operates
until the required pressure is reached.
STARTING
1. Before starting the hydrophore, fill the tube and pump with water, and then start by connecting the
regulator supply to the mains; when the pump stops operating, open the plug above.
2. Mounting is done correctly when there is a leakage through the hole with the plug removed.
If there is still no water leakage, you can leave the pump running for a period not exceeding
the operating time of the unit. If there is still a problem, remove the hydrophore and repeat the
procedure from point 1.
