Raider RD - WP10, Instruction Manual

Page: 19 / 54

19
SUBMERSIBLE PUMP
RD- WP002EX; RD-WP10;
RD-WP12; RD-WP13, RD-WP16
Attention!
(Important for your own security)
Before starting to run your new submers-
ible pump, please have the following items
checked by an expert:
• Ground connection
• Zero conductor
• Fault current breaker switch
must correspond the safety regu-
lations of the power plants and they must
work faultlessly.
• The electrical connections must be pro-
tected from moisture.
• If there is danger of looding, the electri-
cal connections must be taken to higher
ground.
• Circulation of aggressive fluids, as well
as the circulation of abrasive materials must
be avoided at all costs.
• The submersible motor-driven pump
must be protected from frost.
• The pump must be protected from run-
ning dry.
Access on the part of children should also
be prevented with appropriate measures.
pump by suspending it unsupported from its
delivery pipe or power cable.
The submersible motor pump must be sus-
pended from the specially provided handle
or be placed on the bottom of the shaft. To
guarantee that the pump works properly,
the bottom of the shaft must be kept free of
sludge and dirt of all kinds.
If the level of water sinks too far, any sludge
in the shaft will dry out quickly and stop
the pump from starting up. It is necessary,
therefore, to check the submersible motor
pump regularly (by carrying out start-up
tests).
The floater is adjusted in a way that the
ump can immediately be started.
Note!
The pump shaft should have minimum
dimensions of 40×40×50 cm, so that the
floating switch can move freely.
Mains supply
Your new submersible pump is equipped
with a shock-proof plug according to regula-
tions. The pump is designed to be connect-
ed to a 220/230V~50Hz safety socket.
Make sure that the socket is sufficiently
secured (min. 6 Amp.) and is in excellent
condition. Introduce the plug into the socket
and the pump is ready to go.
Important Note! If the mains cable or
plug suffers any damage from external
action, repairs to the cable are prohib-
ited.
Important! This work may only be per-