Raider RD-WL03, User Manual

Page: 12 / 74

12 www.raider.bg
5. SAFETY INSTRUCTIONS
When using electric tools, the following basic safety rules must be followed:
Read all these instructions before attempting to operate this product. Save these instructions:
1. Check the voltage indicated on the label of the tool.
2. Keep the Work area clean
Dirty work area increases the risk of accidents during work
3. Be aware of the work area
Do not leave tools to rain. Do not use power tools in damp or wet locations. Work in well lighted areas.
Do not use power tools near flammable liquids or gases;
4. Guard against electric shock
Avoid touching of body with grounded surfaces (magnifying. pipes, radiators, stoves, refrigerators);
5. Keep children away
Do not allow unqualified persons to touch the tool or the power cord; keep them to distance from the
work place.
6. Store the unused tool of appropriate place
Store the power tools that are not currently using in a dry locked up where they can’t be reached by
children;
7. Do not force the tool
It will do the job better and safer when it is in the producer’s requirements;
8. Use the right accessory and tool
Do not try to force small tools or attachments to the Work you are doing a large and powerful tool. Do
not use power tools for non-specific activities (example: Do not use circular saw for cutting branches
or trunks);
9. Work with the correct Work clothing:
Do not wear loose clothes or jewelry; they can be caught in moving parts of the machine. In outdoor
use is recommended wearing rubber gloves and shoes with stable grip. If you have long hair, wear
protective hair covering;
10. Use safety glasses
Also use face or dust mask, if cutting is relevant with dust generation;
11. Connect dust extraction equipment
If devices can be placed with dust extraction and collecting of dust that ensure these are connected
and properly used;
12. Do not damage the power cable
Never hold tool by the cord never pull the cord to disconnect from the socket, and keep out the cable
from oils and touch of hot oil and sharp edges;
13. Secure work product
Use clamps or a vise to hold the work piece; It is safer than if you are holding a second hand, and you
will be able to use both hands to operate the tool;
14. Do not stretch to reach particular tool, could result in a hazardous situation;
15. Have the tool repaired by a qualified person
This electric tool is straight edge of the relevant safety rules. It is allowed to repair only by qualified
persons using original spare parts, in other case there is considerable risk of accident.
6. ENVIRONMENTAL PROTECTION.
Never place any electric tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and electronic
equipment and its implementation in national laws, old electric tools have to be separated
from other waste and disposed of in an environment-friendly fashion, e.g. by taking to a
recycling depot. Recycling alternative to the demand to return electrical devices:
As an alternative to returning the electrical device, the owner is obliged to cooperate
in ensuring that the device is properly recycled if ownership is relinquished. This can also be done by
handing over the used device to a returns center, which will dispose of it in accordance with national
commercial and industrial waste management legislation. This does not apply to the accessories and
auxiliary equipment without any electrical components which are included with the used device.