Raider RD-HLM37, User Manual

Page: 12 / 52

12 www.raider.bg
after contact with a foreign body, immediately check the machine for damage and before using it,
ensure their elimination;
1.34. The operator or user is responsible for accidents, injuries to other persons or the environment
and material damage.
1.35. The hand-held lawn mower is designed so that all moving parts and the housing guarantee safe
conditions of use. The manufacturer is not responsible for damage caused as a result of attempts to
change the design of the lawn mower.
1.36. To ensure safety, use only original spare parts or parts recommended by the manufacturer.
1.37. Failure to follow the instructions may result in serious injury.
2. Functional description and purpose.
The hand mower is designed for mowing grass at home. The use of a lawn mower for activities other
than its intended use is not permitted.
3. Practical advice:
3.1. The hand push lawn mower is a silent machine for mowing the grass.
3.2. Often lawns are made up of grasses of different varieties. With frequent mowing you will increase
the growth of these varieties, which form dense lawns and strong roots. If you rarely mow your lawn,
you will strengthen and improve the development of tall grasses and weeds. The normal height of the
grass is about 4-5 cm. It is good to plan the frequency of mowing so that with one mowing you reduce at
most 1/3 of the total height of the grass. If you do not water your lawn, do not mow the grass lower than
4 cm, because in case of drought it will be damaged.
3.3. Mow at the lowest height (20 mm) only if your lawn is very flat, you are expecting heavy rainfall
or you are about to take a break.
3.4. The average cutting height (35-45 mm) is best when the intervals between the previous and next
mowing are not long.
3.5. The cutting height of (70 mm) is suitable for the first mowing of the season and when there is
drought.
3.6. Empty the mower collection container after filling 2/3 of its volume, so you will ensure more
efficient mowing and protect the mower from overload.
3.7. When working in particularly severe conditions, its noise changes. In this case, stop, release the
power lever and adjust a higher cutting height. Otherwise productivity will be reduced and the machine
may be damaged.
3.8. When mowing near edges, be careful not to grab foreign objects with the mower.
3.9. Cutting productivity depends on the density, humidity, grass length, and cutting height. Cutting
productivity decreases when the mower is switched on and off frequently during mowing. To optimize
mowing productivity, more frequent mowing, increasing the cutting height and working at a moderate
speed are recommended.
4. Service, maintenance and storage.
Always wear protective gloves when working near the knife!
Perform maintenance procedures regularly to ensure long-term and reliable use of the mower. Check
it periodically for noticeable defects, such as a loose or damaged knife and loose screw connections.
Make sure that the covers and safety devices are in good condition and installed correctly.
5. Cleaning.
5.1. The easiest way to clean the mower is immediately after mowing. After finishing work, clean the
machine thoroughly with a soft brush and a towel. Do not use water and / or solvents and