Raider RD-CS25, User Manual

Page: 10 / 60

10 www.raider.bg
13. Securing the workpiece
Use clamps or a vise to lock the workpiece, it
is safer than if you are holding it by hand, but you
can use both hands on the saw for grinding tool;
14. Do not stretch to reach objects beyond
your
the given tool may cause hazardous situation;
15. Giving the tool repaired only by a qualified
person
This tool is towards the relevant rules of
labor safety. Permitted repairs carried out only
by a qualified pepsonal using original spare
parts, otherwise working for a significant risk of
accident.
19. Preservation of the environment.
In view of environmental power, additional
accessories and packaging must be subjected
to appropriate processing for reuse of the
information contained in these materials.
Do not dispose of electric household waste!
Under the EU Directive 2002/96/EC on waste
electrical and electronic devices and validation
and as a national law power which can be used
more, must be collected separately and be
subjected to appropriate processing for recovery
of contained they scrap.
Depicted elements.
1. auxiliary handle
2. The switch.
3. Dust discharge opening.
4. Main handle
5. Cowls.
6. Locking nut.
7. Drive.
8. Leader.
9. Laser.
SAFETY RULES FOR LASER DEVICE
Laser device used in the power tool design is
the class 2 with maximum power below 1mW
and wavelength 650 nm. Such device is not
dangerous to your sight, however do not look
directly at the source of the light (temporary
blindness hazard).
WARNING. Do not look directly at the source of
laser beam. It may cause hazards. Follow the
below safety rules.
Use the laser device in accordance to the
manufacturer’s instructions.
Do not, either intentionally or unintentionally,
point the laser beam at people, animals or any
object other than processed material.
Do not bring to accidental pointing the laser
beam at bystanders’ or animals’ eyes for a
period longer than 0.25 seconds, for instance by
pointing the laser beam at mirrors.
Always ensure the laser beam is directed at
material which does not have any reflective
surfaces. Reflective steel sheet does not allow
for laser use, because it might cause hazardous
light reflection directed at operator, bystanders or
animals.
Do not replace laser assembly with device of
other type. Any repair should be conducted by
the manufacturer or authorized person.