Raider RD-CM09, User Manual

Page: 10 / 68

10 www.raider.bg
Original instruction manual
Dear Customer,
Congratulations on the purchase of machinery from the fastest growing brand of electric
and pneumatic tools - RAIDER. When properly installed and operating, RAIDER are safe and
reliable machines and work with them will deliver a real pleasure. For your convenience has
been built and excellent service network of 45 service stations across the country.
Before using this machine, please carefully acquainted with these “instructions for use”.
In the interest of your safety and to ensure proper use and read these instructions carefully,
including the recommendations and warnings in them. To avoid unnecessary errors and
accidents, it is important that these instructions will remain available for future reference
to all who will use the machine. If you sell it to a new owner “Instructions for Use” must
be submitted along with it to enable new users to become familiar with relevant safety and
operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and
owner of the trademark RAIDER.
Adress: Sofia City 1231, Bulgaria “Lomsko shausse” Blvd. 246, tel +359 700 44 155, www.
raider.bg; www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008
with scope of certification: Trade, import, export and servicing of hobby and professional
electrical, mechanical and pneumatic tools and general hardware. The certificate was issued
by Moody International Certification Ltd. England
parameter unit value
Model
-
RD-CM09
Rated voltage V 230
Frequency Hz 50
Rated power input W 1200
No-load speed min
-1
5000
Mounting hole diameter mm 22.2
Cutting disc diameter mm 180
Sound pressure level LpA dB(А) 95
Sound power level LwA dB(А) 108
Vibration emission value a
h
m/s
2
5.16
The numbering of the components shown refers to the representation of the power tool on
the graphic pages.
1. Blade guard.
2. Retracting blade guard.
3. On/Off switch.
4. Handle.
5. Spindle handle.
6. Quick-release button.
7. Clamping spindle.
EN