12
www.raider.bg
● If the hose or CE or malfunction in the tool has been spezhe of grinding, not touch, immediately
disconnect from the plug (network) never use a machine with a damaged cord or hose.
● When grinding sparks are generated; keep other CE close to no party or similar items flameable
materials.
● In case of electrical or mechanical malfunction, immediately switch off the machine and disconnect
the plug.
● In case of of interruption or accidentally pulled out, immediately switch on key on / off in position
DURING USE (OFF), to prevent uncontrolled machine.
● If the machine stops, do not apply force.
AFTER WORK
● Before you put the machine, disconnect the appliance
WARNING! Do not carry MACHINE holding it by cable!
INSTRUCTIONS FOR USE
Connecting and commissioning work
1. Connect with the compressor.
a. Saleh plastic cap of the power outlet. Screw the nozzle attachment to hose air supply 1/4”.
b. Lubricate the threads.
c. Check the strength of the air supply hose. In prekasvane not work before you change.
Check on ends - the machine and the hose.
e. hose and tools must be connected by pneumatic preparing group, the distance between them
does not exceed 6 meters. The pilot filter oily places 6-8 drops of lube in minutes
Anti
-
worn
tube
Tool
Tube
Clutch
Nozzle
Pressure
regulator
Filter
Oiler
Main circuit
Pneumatic preparing group.
When connecting the unit with air supply hose does not push the lever to drive!
2. Inserting / changing the chisel
Attention! before you insert or change chisel always switch off air supply!
