28
www.raider.bg
Step3: Lift the rear flap ,fix the grass bag to the flap’s axleto make the bag and the unit
together.
SECTION 5: CONTROLS
RECOIL STARTER
The recoil starter handle is attached to the upper handle.See figure 5, stand behind the
unit in the operating position to start the unit. Throttle cable assy
The throttle cable assy is attached to the upper handle.See figure 5.The throttle cable assy
is used to adjust the speed of the unit. If the handle of the throttle cable is put forward, the
speed of the unit is accelerated.
Cutting height adjustment lever
The cutting height adjustment lever is used to adjust the distance of blade from grass-
ground.
Note: your mower is shipped with the cutting height in the lowest position.Adjust the
cutting height as follows.
The cutting height adjustment levers are located above the four wheels.
To adjust the cutting height.Pull the lever out and away from the mower and then
move it forward or backward to select a new cutting height.See Figure 6.
Summary of Contents for Power Tools RD-GLM01S
Page 35: ...35 SPARE PART ...
Page 49: ...49 SPARE PART RD GLM01S ...
