12
www.raider.bg
2. Place the ignition switch contact position “ON” (Figure
2)
3. Slide the choke fully left following the nameplate
(figure 3)
4. Pull the starter cord gently (9) until you feel the grip
(effort) and pull the ignition of the machine. (Figure 4)
5. After the start of the engine choke back to the
starting position.
ATTENTION !!! Before starting the engine, make sure that you did not include electrical
equipment to the generator (Figure 5)
Attention!
Engine is without oil in the crankcase and is equipped with a sensor for the oil level. At low
oil level engine may not start. When loading oil generator must be horizontal. The oil is poured
slowly until it spill. Do not use stayed or non-motor oils (hydraulic, transmission, etc.). Always
check the oil level before starting or sudden stopping of the engine.
Shortage of oil can cause engine damage, excess oil leads to spotting the candle.
Summary of Contents for Power Tools RD-GG02
Page 51: ...51 EXPLODED VIEW DRAWING RD GG02 ...
Page 52: ...52 www raider bg ...
Page 66: ...66 www raider bg ...
