Raider GT-GT23, User Manual

Page: 14 / 30

14 www.euromasterbg.com
The cord should be cut automatically at the position that
is allocated a maximum (outside the protective cover).
To achieve the required length of the cord, hold the
button, as it was shown in Figure B, and C.
Long grass must be mowed in layers as shown in fig. D
Attention ! Never mow wet grass or wet .
Keep trimmer from hard surfaces and injuries.
3.3 Angle and direction of mowing Fig. (E) 3.4
Replacement Spool Fig . (C)
· Turn off the trimmer from the socket ;
· Turn machine cutting equipment upward ;
· Hold firmly with one hand propeller motor ( 1 )
. With the other hold the spool holder ( 2 ) . Pull the
blade out of the holder while the parts are separated .
· Replace empty spool ( 3 ) and clean the inside of
the holder of the remnants of grass and dust.
· Then put the new pulley and reassemble the parts
in reverse order.
· Download of the twine to ensure proper placement
of the reel.
· Replace the cord just the same kind of brand
“GREEN TOOLS”