7
• Store the battery at room temperature,
approximately 68–77° Fahrenheit (F), and in a dry
area for best results.
• When transporting or temporarily storing the
battery, the temperature range should be from
approximately 40–100°F. Do not store the battery
or model in a hot garage, car or direct sunlight
whenever possible. If stored in a hot garage or car
the battery can be damaged or even catch fire!
• Do not over-discharge the LiPo battery.
Discharging the LiPo battery too low can cause
damage to the battery resulting in reduced power,
run time or failure of the battery entirely.
LiPo cells should not be discharged to below 3.0V
each under load. In the case of the 3-Cell/3S 11.1V
LiPo battery used to power the SuperCat 700BL, you
will not want to allow the battery to fall below 9.0V
during operation.
The electronic speed control (ESC) has low voltage
cutoff (LVC) protection. When the battery voltage
drops below a set point the throttle is gradually
reduced. At this point the model will need to be
returned to shore and the battery recharged.
Battery Installation
1.
Rotate the hatch lock on the hull cover either
clockwise or counter-clockwise to unlock the
hatch.
2.
Remove the hull cover.
3.
Place the battery with the hook fastener side
facing down to attach to the loop fastener that
is already adhered to the bottom of the boat.
4.
Ensure that the wires and plug are facing the
rear of the boat.
3
