Rage Micro VINTAGE STICK, Instruction Manual

Page: 3 / 12

3
IMPORTANT NOTE: Lithium Polymer batteries are significantly more volatile than the
alkaline, NiCd or NiMH batteries also used in RC applications. All instructions and
warnings must be followed exactly to prevent property damage and/or personal injury
as mishandling of LiPo batteries can result in fire. By handling, charging or using the
included LiPo battery you assume all risks associated with LiPo batteries. If you do
not agree with these conditions please return the complete product in new, unused
condition to the place of purchase immediately.
LiPo Battery Warning
Safety Precautions
Failure to use this product in the intended manner as described in the following instruction can
result in damage and/or personal injury. A Radio Controlled (RC) airplane/helicopter/quadcopter
is not a toy! If misused, it can cause serious bodily harm and damage to property.
Keep items that could become entangled away from the propeller, including loose clothing,
tools, etc. Be especially sure to keep your hands, face and other parts of your body away from
the propeller.
As the user of this product, you are solely and wholly responsible for operating it in a manner
that does not endanger yourself and others or result in damage to the product or the property
of others.
This model is controlled by a radio signal that is subject to possible interference from a variety
of sources outside your control. This interference can cause momentary loss of control so it is
advisable to always keep a safe distance from objects and people in all directions around your
model as this will help to avoid collisions and/or injury.
• Never operate your model if the transmitter battery voltage is too low.
• Always operate your model in an open area away from obstacles, people, vehicles,
buildings, etc.
• Carefully follow the directions and warnings for this and any optional support
equipment. (chargers, rechargeable batteries, etc.).
• Keep all chemicals, small parts and all electronic components out of the reach of
children.
• Moisture causes damage to electronic components. Avoid water exposure to all
electronic components, parts, etc. not specifically designed and protected for use
in water.
General Precautions