Rage Golden Age Series, Instruction Manual, Page: 5 / 10

5
Charging Flight Battery
Open door on lower left of transmitter Move charge plug out and close door
Plug flight battery into charge plug. Make sure to
maintain correct polarity by aligning the red dots
when plugging in the battery.
NOTE: The transmitter does not need to be on to charge flight battery.
The yellow charge light on the transmitter
lights during charging. When the light goes out,
charging is complete.
Yellow Charge Light
Installing Flight Battery
Invert the model being careful not to
damage the fuel vent details on the top
of the wings. Plug the battery into the
supplied pigtail. Place the charged flight
battery in the battery tray with the label
facing you and the plug end facing the
rear of the airplane. The battery is held
in place by magnets. Set the model on
its wheels and turn on the transmitter.
The model will pair with the transmitter
automatically. Successful pairing is
indicated by the rudder and elevator
moving briefly.