Rage Comet & Comet ‘R’ Maintenance Guide
Issue 2.0
October 2014
"Hard" Oil Pressure Alarm
- The letters O.I.L. will be displayed if the mechanical switch
on the oil pressure sensor (either ETB's sensor supplied with the package or the
original engine oil pressure switch) is activated. The Alarm trigger point on the ETB
sensor is fixed at 7.5psi or 0.5 BAR.
"Soft" Oil Pressure Alarm
- The DD2 range have a built-in oil pressure monitoring
system. The user can pre-set the oil pressure level below which the OPA Alarm
activates. In addition this can be combined with RPM values. OPA is displayed to
distinguish it from a mechanical (Hard) activation.
Oil Temperature Alarm
- You can pre-set the temperature above which the Alarm will
operate. The DigiDash 2 will monitor the engine oil temperature and if this rises above
your pre-set level, the OTA Alarm will be displayed.
Fuel Level Alarm
- User pre-defined level of fuel remaining in the tank, below which the
FLA Alarm will be displayed.
