INSTRUCTIONS FOR USE
24
LM05EN002
G
INSTRUCTIONS FOR COMMISSIONING - OPERATION - SHUT-DOWN
G.1
GENERAL WARNINGS FOR NORMAL OPERATION OF THE MACHINE
The operator must:
Be trained as required by the laws on safety in the workplace - for Italy see Legislative Decree
81/2008; refer to the laws in force in the Country of the user;
Be in perfect mental and physical condition, be always alert and with quick reflexes;
Use personal protective equipment as listed in the following paragraph (G.2);
Before starting to operate the machine, carry out the checks listed in the following paragraph to
ensure that all the safety conditions are met in order to prevent accidents.
The operator must not:
Tamper with or alter the operation or efficiency of the protection devices installed on the machine.
G.1.1
Checks and inspections for the safe use of the machine
The operator must check:
That the machine has not been tampered with. If the machine has been altered, it must be put out of
service and the supervisor must be notified immediately;
The general condition of the machine and of its structures: no damage or conditions of evident
negligence must be present, especially in relation to ageing, wear and fatigue;
That the machine bears all the icons and warning plates required, as d
escribed in the section “Safe
interaction with the machine”;
That all the control devices are equipped with identification plate.
WARNING
:
If the machine is damaged or has been modified with respect to its original configuration as
established by the manufacturer, it must not be used.
Any technical modification affecting the operation or safety of the machine must be carried out
exclusively by the manufacturer’s technical personnel or by technicians formally authorised by
the manufacturer.
WARNING
:
The preliminary checks must be performed with the machine NOT connected to the electrical
supply.
