INSTRUCTIONS FOR USE
18
LM05EN002
E
TRANSPORTATION - HOISTING - STORAGE
E.1
GENERAL WARNINGS
The operator responsible for transporting, hoisting and storing the machine must:
Be a person adequately trained and informed about the work they are about to do;
Use the personal protective equipment listed in the following paragraph (see paragraph E.2);
Use suitable equipment to carry out the operations safely and check that such equipment is in perfect
condition;
Use all service equipment as intended by their respective manufacturers.
Before handling the machine, it is necessary to check the capacity and efficiency of the lifting means:
HAZARD:
To hoist the machine or some parts of it, it is necessary to use means with a minimum capacity
greater than the declared weight of the machine (about 650 kg).
Carry out hoisting and transport operations bearing in mind the following warnings:
HANGING LOAD HAZARD
During the hoisting operations make sure that there are no exposed persons in the area
occupied by the machine and in the surrounding areas. Hoisting must be carried out
seamlessly (free from abrupt movements). During the hoisting procedures, the machine must
always be in a stable and secure position. For better load stability, keep the load as low as
possible when moving the machine.
During hoisting, avoid sudden movements that could damage to the machine.
WARNING:
All handling operations must be carried out in the absence of an explosive
atmosphere.
E.2
PERSONAL PROTECTIVE EQUIPMENT
The operator responsible for transporting, hoisting and storing the pump must use the following personal
protective equipment:
Pictogram
Description
Note
FOOTWEAR
Use of safety shoes to avoid the risks generated by falling materials.
PROTECTIVE GLOVES
Gloves for hand protection available in case of manipulation of objects
that can cause damage or injuries.
HELMET
Protective helmet to be used during machine hoisting operations to
prevent the dangers generated by hanging loads.
SUITABLE CLOTHING
Suitable clothing, such as overalls: it is prohibited to wear wide sleeves
and/or loosen clothing that could be easily caught in mechanical parts.
