
LED
light
Channel,LED 1,channel
1,LED
2,channel
2….LED 6,Channel 6
,
LED
on
means
signal
transmit
Choose
the
previous
channel
Presss[Chennel
selection-left]
,
the
current
channel
LED
light
will
be on,Press[Chennel selection left]within 3 seconds,press channel 6
.
channel
5,channel 4
accordingly
.
Channel 3-channel 2,channel 1…
channel 6 in cyclic selection,the
LED
light
will
be
off
if
no
any
operation
within
3
seconds
.
Choose
the
next
channel
Press[Chennel
selection-right]the current channel
LED
light
will
be on,Press[Chennel selection-right]within 3
seconds,press
channel
1
.
channel
2,channel
3
accordingly
.
Channel 3-channel 2,channel
1…
channel
6
in
circle
selection
,
the
LED
light
will be
off
if
no
any
operation
within
3
seconds
.
[Up/Open]
[Stop]
open the curtains
.
Stop the curtain.
[Down/Close]
[Up Tilting/75%]
Close the curtains.
Short time press,up tilting, press 1.5
second, move to IP1 75% limit position.
[Horizontal Position/50%]
[Down Tilting/25%]
Press tilt
to horizontal
position,press
1.5 second,move
to
IP3 50% limit
position.
Presstilt
to
D
own tilting
,press
1
.
5
s
econd,
move
t
o
I
P2 25
% l
imit
p
osition.
[Channel Choose Left]+[Stop]
[Channel S[Up/Open]
Direction change,After entering into
programming, press Programming
Button to confirm.
Press 5 seconds,enter into [Up/Open],
limit setting,move to position you like,
press Programming Button to confirm.
[Channel S[Stop]
[Channel S[Down/Close]
Press 5 seconds, delete limit.
Press
5
s
econds,
e
nter
i
nto
[D
own
/C
lose]
l
imit
s
etting
, m
ove
t
o
t
he
p
osition
y
ou
l
ike
,
p
ress
P
rogramming
B
utton
t
o
c
onfirm.
Button function
⑤
⑥
[Channel
Setting]
Open the case, press the button for
programming.
⑦
Combination button
The specific operation of combination keys is as follows
+
5S
5S
+
5S
5S
+
5S
5S
[Up/Open]+[Down/Close]
[Channel S[Up Tilting/75%]
External control mode,Press up and
down button and then confirm by
programming button.
Press programming button and IP1 button.
[channel S[Horizontal
Tilting/50%]
[Channel S[Down Tilting
/25%]
Quick press to IP3,long press for 50%
limit position.
Quick press to IP2, long press for 25%
limit postion
+
+
+
Remark
1.All button’s function should be work
with
motor/controller
2.Choose current channel for all function setting
3.Hold programming button when press up/down button for limit setting
2
3
1.5S
1.5S
1.5S