RAEGuard 2 PID User’s Guide
17
7.3
Using The Magnet Key
Using the magnet end of the Magnet Key, briefly touch the glass
above the MODE circle or the triangles labeled [+] and [-]. Then
remove the key straight out and away from the RAEGuard 2 PID.
RAEGuard Magnet Key touching glass above the [+] triangle.
Important!
Never drag the key sideways, or two functions may be
activated.
7.4
System Initialization
When the RAEGuard 2 PID’s system power is turned on, it initializes
and a RAE Systems logo appears on the display. As the transmitter is
warming up, each component is checked. The countdown timer
appears on the screen for the warm-up.
7.5
Reading Display
As the transmitter enters the Reading Display, it automatically starts
testing for errors and goes through a cycle of checking each alarm
Summary of Contents for RAEGuard 2 PID
Page 1: ...User s Guide RAEGuard 2 PID P N D03 4001 000 Rev D April 2012...
Page 5: ...RAEGuard 2 PID User s Guide 4 Copyright 2012 RAE Systems by Honeywell...
Page 6: ...RAEGuard 2 PID User s Guide 1 Section 1 RAEGuard 2 PID User s Guide...
Page 62: ...RAEGuard 2 PID User s Guide 57 SECTION 2 DigiPID User s Guide...