QRAE II User Guide
Page 56
4. Turn the QRAE over and slide the battery out of its compartment.
5. Place the new battery into the compartment with its six gold-plated contacts aligned
over the six pins.
Note:
Before installing the new battery, visually inspect the contacts to make sure
they are clean. If they are not, wipe them with a soft cloth. Do not use solvents or
cleaners.
6. Place the cover over the compartment.
7. Tighten all three screws by turning them clockwise with the hex wrench.
9.2
Installing The Alkaline Battery Adapter
The Alkaline Battery Adapter substitutes for the Li-Ion battery. The adapter (part number
020-3403-000) accepts three AA alkaline batteries
(use only Duracell MN1500) to
provide approximately 12 hours of operation.
2.
Place the QRAE II face-down on a soft surface.
3.
Use the hex wrench to loosen each of the three screws by turning them
counterclockwise.
4.
Hold the QRAE II down and lift the compartment cover by pulling on the belt clip.
5.
Turn the QRAE over and slide the Li-ion battery out of its compartment.
