Rae QRAE 3, User Manual, Page: 21 / 71

18
8.3. Menus And Submenus
In Programming Mode, menus and submenus are organized as shown here:
Calibration Measurement Alarms Datalog Monitor Wireless*
Multi Bump Sensor On/Off Alarm Limits Clear Datalog Date And Time Radio On/Off
Multi Zero Meas. Unit Alarm Mode Interval Display Roaming
Multi Span LEL Meas. Gas Alarm Settings Sensor Selection Pump
Speed**
PAN ID
Single Bump Exit Comfort Beep Data Selection Site ID Channel
Single Zero Man Down
Alarm
Datalog Type User ID Join Network
Single Span Exit Action When
Full
User Mode Interval
Set LEL Cal.
Gas
Exit Zero At Start Off Network
Alarm
Set Span Value Exit Factory Reset
Exit Exit
* Wirelessly equipped versions only.
** Pump-equipped version only.
8.3.1. Editing And Selecting Parameters And Sensors
There are a few basic ways to edit parameters, select sensors, and perform other activities
in the QRAE 3. The actions performed by pressing keys always match 1-to-1 with the
boxes along the bottom of the display and the two keys. Some parameters are edited by
scrolling and selecting individual items (black bars behind white text act as highlighters).
Some include a choice via “radio keys,” where only one item in a list can be selected,
while other menus use boxes for you to “check” with an “X,” and these allow for
multiple items in a list to be selected. In all cases of editing, you can save or undo your
choice.