vi
Programming Mode • 19
Programming Menus • 20
Security Levels • 21
Calibrate Monitor • 22
Change Alarm Limits • 22
Change Datalog Setting • 23
Change Monitor Setup • 24
Change Sensor Configuration • 25
Correction Factors • 26
Diagnostic Mode • 27
Sensor Name and Raw Sensor Readings • 27
RF Test (Radio Frequency) • 27
Adjust Lamp Failure Threshold • 27
Battery Type and Bias • 28
Show x1 and x10 Range of PID Sensor • 28
Display Contrast • 28
LEL Power • 28
Clock, Time, Battery, and Temperature • 29
Sensor Expiration Date • 29
Pump Stall • 29
Back Light Threshold • 29
Serial Number and Pump • 29
Battery Duration Time • 29
Communicate with PC • 29
Maintenance • 30
Li-Ion Battery Pack • 31
Replacing the Battery Pack • 31
Emergency Alkaline Battery Adapter • 32
Sensor Replacement • 33
CO Sensor Charcoal Filters • 34
Special Bias Voltage for Toxic Gas Sensors • 35
PID Sensor Cleaning/Replacement • 36
Taking Care of the Lamp • 36
Sampling Pump Replacement • 37
Troubleshooting • 38
Specifications • 40
Range, Resolution & Response Time • 41
Service and Repair Record • 42
