889-3809-02
Model 2018E Operations Manual Rev Apr 2020 Page
35
of 39
While the monitor is in the diagnostic display mode all monitoring functions are still being performed. Any fault
that occurs while in this mode will be displayed once this mode is exited. It is not possible to accidentally reset a
fault while in the diagnostic display mode.
While in the diagnostic display mode, a short press of the front panel
RESET
pushbutton will advance to the next
diagnostic display.
The diagnostic display sequence is:
Tap
RESET
to
move between
displays
Configuration 1
Configuration 2
AC Line Voltage
Permissives
Channel 1
Hold
RESET
for 3 seconds (two chirps)
to enter or exit a sub-display
Prior Fault 20
Prior Fault 1
Permissives
Channel 18
FYA Settings
Channel 1
FYA Settings
Channel 18
Hold
RESET
for 1.5 seconds (one chirp)
to enter or exit diagnostic display mode