Radwin RADWIN 2000 D+, User Manual

Page: 159 / 229

RADWIN 2000 D+ User Manual Release 3.6.00 14 ‐ 3
Bulk Software Backup Chapter 14
Figure 14 ‐ 3: Adding a single site for backup
Enter the IP address of the site, the Read ‐ Write Community (Default: netman ) and
then click OK . The site will appear in the Software Upgrade list box.
Items from the list can be cleared by selecting them and then using the right button .
The right button in Figure 14 ‐ 3 , may be ruse to remove one or more selected sites.
3. You may choose the SNMP version but probably it should be best left at your log ‐ on
setting.
4. Click the Start Backup button. Progress bars indicate backup status.
The success or failure of the backup is displayed on completion:
Save configuration produces a text file in the format of the above example for backing up an
installed link.
The files produced by the above process are:
10.104.3.4_29.01.2015.backup
10.104.3.2_29.01.2015.backup
BulkBackupConfig_2015_01_29.txt