Radwin 2000+ SERIES, User Manual

Page: 126 / 276

RADWIN 2000+ Series User Manual Release 4.2.40 7 ‐ 13
Management
To make any of the following changes, you must be logged on as user admin . The SNMPv3
passwords for admin and operator are as follows:

To add an SNMPv3 user:
1. Click the right hand edit icon on any empty line of the list:
2. An Edit window is displayed:
Figure 7 ‐ 6: Add or Edit a user
3. Enter a user name and password. Confirm the password as indicated.
4. Choose a Profile:
• Read Only provides Observer level log ‐ on access.
• Read Write provides Operator level log ‐ on access
• Disabled stores the user details in the data base for future use. It must be
changed to Read Only or Read Write to become usable.
Table 7 ‐ 2: SNMPv3 predefined users
User Name Password Profile
admin
netwireless Read Write
operator
netpublic Read Only