Radwin 2000+ SERIES, User Manual

Page: 122 / 276

RADWIN 2000+ Series User Manual Release 4.2.40 7 ‐ 9
Management
3. For Security model you may choose between SNMPv1 or SNMPv3. The choice is site
dependent. If you choose SNMPv1, you may only enter an IP address and port
number. For SNMPv3, you should supply a user name and password:
4. Click OK to save your choice.
Note that for each active trap destination, the Clear Trap Destination button is enabled:
VLAN for Management
Management VLAN Configuration
Figure 7 ‐ 4: VLAN for Management
VLAN Management enables separation of user traffic from management traffic whenever
such separation is required. It is recommended that each member of a sector be configured
with different VLAN IDs for management traffic. (This reduces your chances of accidentally
locking yourself out of the link.)

To enable VLAN for management:
1. In the window of Figure 7 ‐ 4 , check the Enabled box.
2. Enter a VLAN ID. Its value should be between 2 and 4094.
After entering the VLAN ID, only packets with the specified VLAN ID are processed
for management purposes by the radio unit. This includes all the protocols sup ‐
VLAN IDs are used by RADWIN products in three separate contexts:
Management VLAN, Traffic VLAN and Ethernet Ring. It is recommended
that you use different VLAN IDs for each context.