Radwin 2000+ SERIES, User Manual

Page: 112 / 276

RADWIN 2000+ Series User Manual Release 4.2.40 6 ‐ 29
Telnet Access to Either ODU
display PM <interface:AIR,LAN1>
<interval:current,day,month>
Shows the performance monitor tables for each
interface according to user defined monitoring
intervals
display bands Displays available bands
display ldpc_mode On or off; default off
Table 6 ‐ 3: ODU Telnet ‐ Set Immediate Commands
Command Explanation
set ip <ipaddr> <subnetMask>
<gateway>
Set the radio unit IP address, subnet mask and
gateway. The user must reset the radio unit after the
command completion
set trap <index:1 ‐ 10> <ipaddr>
<port:0 ‐ 65535>
Set a specific trap from the traps table (e.g. set trap 3
192.168.101 162)
set readpw <oldpasswd> <passwd> Set the read access password (Read Community)
set writepw <oldpasswd> <passwd>
Set the read ‐ write access password (Read ‐ Write
Community)
set trappw <oldpasswd> <passwd> Set the trap Community string
set buzzer <mode> mode: 0 = off, 1 = auto, 2 = on
set tpc<power:Value between
minimal Tx power, and maximal Tx
power>
Set the radio unit Tx Power. If a wrong value is
entered, both min and max values shall be displayed
in the error reply
set name <new name> Set the name of the link
set location <new location> Set the name of the location
set contact <new contact> Set the name of the site manager
set ethernet <port:LAN1>
<mode:AUTO,10H,10F,100H,100F,D
ISABLE> Set the mode and speed of the Ethernet port
reboot
Resets the radio unit. The user is warned that the
command will reset the radio unit. A new Telnet
session to the radio unit may be opened after the
reset is complete.
help Displays the available commands
Table 6 ‐ 2: ODU Telnet ‐ Display Commands (Continued)
Command Explanation