B. Defining defects of unclear origin and outlining methods of elimination
can be settled only in participation of a user and the manufacturer
representatives,
C. RADWAG does not take any responsibility connected with destructions
or losses derives from non-authorized or inappropriate (not adequate
to manuals) production or service procedures,
D. Warranty does not cover:
•
Mechanical failures caused by inappropriate maintenance of
the device or failures of thermal or chemical origin or caused
by atmospheric discharge, overvoltage in mains or other
random event,
•
Inappropriate
cleaning.
E. Forfeiture of warranty appears after:
•
Access by an unauthorized service,
•
Intrusion into mechanical or electronic construction
of unauthorized people,
•
Installing another operating system,
•
Removing or destroying protection stickers.
F. The detailed warranty conditions one can find in warranty certificate.
G. Contact with the central authorized service:
+48 48 384 88 00 ext. 106 or 107.
4. UNPACKING AND MOUNTING
4.1. Scales of Y/KTP/C1 series
A. Take the device out of the package,
B. Put the scale on an even stiff ground,
C. Remove transport protection:
D. Scale should be levelled by turning regulation
feet. Levelling is correct if air bubble is situated
in the central position:
8
Summary of Contents for Y/KTP series
Page 2: ...2 DECEMBER 2011...
