RADWAG Y/KTP series, User Manual

Page: 39 / 176

15.3. TCP protocol setting
TCP
(Transmission Control Protocol)
is a protocol for communication
between two computers. It operates in mode client-server. Server awaits
on connection iniciation on a specified port while client initiates connection
to the server. Scale software allows setting the port for the
„Tcp”
protocol.
Procedure:
•
Enter
< Communication>
parameter group as described
in chapter 16 of the manual,
•
Select:
„ Tcp / Port”
then you will see window
<Port>
with the screen keyboard,
•
Enter the required number and press .
16. DEVICES
16.1. Computer
The scale can cooperate with a computer. Active connection
scale-computer
is signalled by icon in the top bar of the main window. In submenu
< Computer>
some settings needs to be configured for cooperation
with computers.
Enter submenu
< Computer>
, press and then
:
„ Devices / Computer”
.
16.1.1. Computer port
Procedure:
•
Enter parameters’ group
< Devices>
according to ch.
16 of this manual,
•
Select
„ Computer
/
Port”
and then set the appropriate option.
39