RADWAG X2 Series, User Manual

Page: 9 / 30

- 9 -
1.5. WARRANTY CONDITIONS
A. RADWAG feels obliged to repair or exchange all elements that appear to be faulty by
production or by construction,
B. Defining defects of unclear origin defects and means of their elimination can only be realized
with assistance of manufacturer and user representatives,
C. RADWAG does not bear any responsibility for defects or losses resulting from unauthorized or
inadequate performing of production or service processes,
D. Warranty does not cover:
•
mechanical defects caused by product exploitation other than intended, defects of thermal
and chemical origin, defects caused by lightning, overvoltage in the power network or
other random event,
•
balance defects if it is utilized contrary to its intended use,
•
balance defects, if service claims removing or destroying protective stickers which secure
the balance’s housing against unauthorized access,
•
mechanical defects or defects caused by liquids and natural wear,
•
balance defects caused by inappropriate setting or by electrical wiring failures,
•
defects caused by overloading the mechanical measuring system,
•
maintenance activities (cleaning).
E. Loss of warranty takes place if:
•
a repair is carried out outside RADWAG sales office or authorized service point,
•
service claims intrusion into mechanical or electronic construction by unauthorized people,
•
other version of the operating system is installed in a balance,
•
the balance does not bear company protective stickers.
F. Detailed warranty conditions are listed on a service card.
1.6. SUPERVISION OVER METROLOGICAL PARAMETERS
Metrological parameters of a balance need to be checked by a user in determined time intervals.
Inspection frequency is conditioned by ambient conditions in which a balance is used, kind of carried
out processes and adopted quality management system.
1.7. USER MANUAL SIGNIFICANCE
It is very important to read the user manual carefully before switching on and starting up balance
operation, even if you are experienced and have worked with this type of balance before.
1.8. BALANCE USER TRAINING
The balance should be utilized and supervised only by users who are trained and experienced in
such type of weighing instruments.