Return to weighing:
•
Press
.
13. OTHER FUNCTIONS
The scale software is equipped with additional functions, which can influence
scale operation:
•
Power save mode,
•
Backlight
control,
•
Overload
warning.
13.1. Power save mode
The scale is equipped in the power saving function that prolongs the operation
time while supplying from batteries. If the scale indicates zero for 5 seconds
and no key is pressed function „POWER SAVE” automatically switches of
the backlight.
13.2. Overload warning
Overload is signalled over the maximum weighing range increased by 9
reading divisions. In case a load is equal or greater than the defined one the
weighing window shows warning < u u u u u > and alarming sound is audible.
13.3. Backlight function
The backlight can be switched on or off by users.
In order to switch off backlight keep pressed
for 3 seconds.
The backlight is off and then the scale returns to the weighing mode.
In order to switch on backlight keep pressed
for 3 seconds.
The backlight is on and then the scale returns to the weighing mode.
- 13 -
