RADWAG WLY/KTP Series User Manual Download Page 53

Page: 53 / 176

17.1.2. Screen font

The font type can be changed in the display workspace.

Procedure:

•

Enter

Display>

according to ch. 17 of this manual,

•

Choose:

„

Text information /

Font”

and set the required font

type.

Accessible fonts:

•

Arial,

•

Courier.

17.1.3. Font size

Setting the font size for the workspace in the display.

Procedure:

•

Enter

Display>

according to ch. 17 of this manual,

•

Choose:

„

Text information /

Font size

and set the required

font size.

Accessible sizes:

•

small,

•

Average,

•

Large.

17.1.4. Bold fonts

Setting bold fonts in an area of the workspace of the display.

Procedure:

•

Enter

Display>

according to ch. 17 of this manual,

Summary of Contents for WLY/KTP Series

















































































































































































Search results

Summary of Contents for WLY/KTP Series

Reviews:

Related manuals for WLY/KTP Series

Brands by name

Popular brands

RADWAG WLY/KTP Series, User Manual

Search results

Summary of Contents for WLY/KTP Series

Reviews:

Related manuals for WLY/KTP Series

Brands by name

Popular brands