88
APPENDIX A
Programming of bar code scanner (description for users Power Scan
).
Programming means reading appropriate codes in appropriate order from book
attached to scanner „
Programming Guide
”.
Way of operating is described in „
Programming Guide
” attached to scanner.
Speed of transmission RS 232 in scanner is default set on 9600 b/sec. If
change is necessary , program the scanner in appropriate way.
1. Programming the type of reading by scanner barcode
Symbology Selection
SET
Enable EAN-13
(type of code at choice)
END
2. Setting the prefix for WLT balance
Label Transmit Configuration, Settings Global Prefix(es)
SET
Set Prefix
0
1
END
3. Setting the suffix for WLT balance
Label Transmit Configuration, Setting Global Suffix(es)
SET
Set Suffix
C
R
END
4. Setting label ID location
SET
LABEL I.D. = NONE
END
Notice:
RADWAG standard is – no symbology sign in the frame (pure code)
(Symbology specification – LABEL I.D. = NONE)
