32
„COM ports Screen”
automatically displays number
of installed COM port. In this
very case it is COM8.
2. Enter
< P5.ducE / 5.1.PC / 5.1.1.Prt>
submenu and set
<USbb>
value.
3. Run program for measurements readout.
4. Set communication parameters – select COM port that was installed in the
course of drivers installation (in this very case it is COM8).
5. Start cooperation.
15. PERIPHERAL DEVICES
<P5.ducE>
menu contains list of devices cooperating with scale.
15.1. Computer
<5.1.PC>
submenu allows you to:
•
select port to which the computer is connected,
•
enable/disable
continuous
transmission,
•
set frequency of printouts for continuous transmission.
15.1.1. Computer Port
•
Enter
<5.1.PC / 5.1.1.Prt>
submenu.
•
Press
key, parameter values are displayed successively one by one:
nonE
– none;
rS1
– RS232 (1);
rS2
– RS232 (2),
USbb
– USB type B.
•
Press
key to confirm, next go to the home screen.
15.1.2. Continuous Transmission
•
Enter
<5.1.PC / 5.1.2.Cnt>
submenu.
•
Press
key, parameter values are displayed successively one by one:
nonE
Continuous transmission disabled.
CntA
Continuous transmission in basic unit.
Cntb
Continuous transmission in current/temporary unit.
