RADWAG WIC/A1/C/2, User Manual

Page: 8 / 21

8
Avoid using cleanser without water since it may result with damage of the
cleaned surface, please mind that large amount of water mixed with cleanser
is a must.
3.5. Cleaning Aluminium Components
While cleaning aluminium components use products acid by nature, e.g. spirit
vinegar, lemon. Do not use cleansers containing abrasive substances. Avoid
using hard brush, this may cause scratches.
It is recommended to use microfibre cloth. While polishing the surface use
circular movements. Use clean, dry cloth to make the surface shine.
4. SERVICE AND REPAIR
In case of any sign of damage, it is necessary to disconnect
the device form the mains immediately. The damaged
component must be replaced or repaired by RADWAG
service directly.
In case of any problems with correct operation of the scale, contact the closest
manufacturer's service point. In case of defects, deliver the faulty product to the
manufacturer's service point. If the product cannot be delivered to the
manufacturer's service point, call the service and report the defect. Repair
scope and method will be set up.
The user is NOT ALLOWED to carry out any kind of repair
of the device himself/herself. Any attempt of scale
modification, repair etc., by unauthorized persons, will result
with loss of validity of manufacturer-issued certificates,
declarations and warranty.
5. RECYCLING
HY10 scales must be recycled, they are not to be treated as a regular
household waste. Scales to be decommissioned must be decommissioned
in accordance with valid legal regulations.