RADWAG PUE HX5.EX, Software Manual

Page: 25 / 96

25
•
Activation of the IM01.EX communication module results with automatic
display of the following data:
Status
Active connection status, the status takes the following values:
Connected
,
Not connected
.
Software version
Software version of the IM01.EX module.
Additional modules
Submenu for configuration of optional additional modules of the
IM01.EX communication module (anybus module, analog outputs
module).
10.2. Computer
The weighing device can integrate with a computer. Active
weighing device –
computer
connection is signalled by pictogram (top bar of the home
screen). To configure scale-computer connection settings go to
<
/
Peripherals / Computer> submenu.
10.2.1. Computer Port
Communication between the weighing device and the computer can be
established via the following ports:
RS232 (1)
RS232 (2)
RS232 ports of the scale (M12 5P connectors).
RS232 (3)
RS232 (4)
RS232 ports of scale-connected IM01.EX communication module (M12 8P
connectors).
RS485
RS485 port of scale-connected IM01.EX communication module (M12 4P
connector).
Ethernet
Ethernet port of scale-connected IM01.EX communication module (RJ45
connector).
Procedure:
•
Enter
<Peripherals / Computer / Port>
submenu and set respective
option.
<Port settings>
submenu differs depending on the selected port:
Port Settings
RS232 (1)
RS232 (2)
RS232 (3)
RS232 (4)
RS485
Baud rate: 2400 - 115200 bit/s.
Data bits: 7, 8.
Stop bits: 1, 2.
Parity: None, Odd, Even.