RADWAG PUE HX5.EX, Quick Start Manual, Page: 8 / 12

6. CLEANING AND MAINTENANCE
Avoid using aggressive cleaning
agents (e.g. solvents, cleansers
containing chlorine, corrosive
substances or bleach).
Clean the indicator when there is
no risk of explosive atmosphere
occurrence. Do not clean the indicator using
compressed air.
Avoid using cleansers containing
abrasive substances or scouring
preparations.
Clean the housing using a wet
cloth. It is especially important if
the indicator is operated in a room
where there is dry air. Moisture
protects against accumulation of
electrostatic charges.
Make sure that no dust or liquid
enters the weighing system and the
inside of the indicator.
6.2. Cleaning Tips
Prior to maintenance it is necessary
to disconnect the power supply from
the mains and to check grounding
connection and status. For cleaning use only soft cloths made
of microfiber, natural fibres or artificial
fibres. Do not use any abrasive cloths
or any material that may scratch the
surface! Apply the cleanser onto the cloth first.
Avoid applying the cleanser directly
onto the device!
6.1. Notes and Warnings
• STAINLESS STEEL ELEMENTS, ALUMINUM can be cleaned with a soft cloth slightly moistened with a solution of water
and a mild detergent (e.g. soap or dishwashing liquid).
• Plastic elements can be cleaned with a soft cloth slightly moistened with a solution of water and a mild detergent
(e.g. soap or dishwashing liquid).
• Dry cleaned elements using soft and dry cloth or use dust-free paper towel to absorb the remaining moisture.
• Do not install the components until they are completely dry.