RADWAG PSW, User Manual

Page: 19 / 34

- 19 -
Procedure:
1. Place the internal frame (1) on its target spot.
2. Place the stone top (2) onto shock absorbers. Mind that the top
cannot touch side stops.
3. Install the external design (3) of the workstation.
Make sure to keep about 10 mm distance between the stone top and the
sides of the weighing table.
4. Install the monitor stand (4)
5. Install the liquid container inside the right locker (the container has to
be installed in a holder inside the locker). Connect the flexible wires to
the container.
Now you can equip your workstation with electronic components.