- 34 -
9.7. Temporary measuring unit
This function is available for various modes except for <PARTS COUNTING>
and <PERCENT WEIGHING>.
Function enables selecting a measuring unit which will be indicated next to
mass reading during the operation. Set measuring unit will be in use from the
moment of its activation until its change or switching the balance off and on.
Each pressing of the
button provides change of the measuring unit.
Available settings:
•
For verified balances, a user can select from the following: [g], [mg] or
[kg], [ct]
•
For non-verified balances, a user can select from the following
measuring units: [g], [mg], [kg], [ct], [lb], [oz], [ozt], [dwt], [tlh], [tls], [tlt],
[tlc], [mom], [gr], [ti], [N]
9.8. Information
Function enables displaying additional information in the bottom line. Depending
on the needs, a user can choose the following options, which are shown while
working in <
WEIGHING
> mode:
